Model No:CAD-HDP3100CP
1. Introduction
This USB Extender can extend USB 3.2 Gen 1 signal to a distance up to 100m/328ft via a
single CAT6a cable. The transmitter features one USB-C host port, one USB-C and two
USB-A device ports. The receiver features two USB-C and two USB-A device ports.
Bi-directional 24V PoC (Power over Cable) function allows user to only supply power to
either the transmitter or the receiver.
It can be widely used for long distance USB signal transmission between USB sources and
devices like webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash
sticks, printers, scanners, touch panel displays and other USB devices.
2. Features
☆ Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
☆ USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
☆ Backwards compatible with USB 2.0 and 1.1
☆ Hardware acceleration for isochronous and bulk transfer
☆ TX features 1x USB-C host port, 1x USB-C and 2x USB-A device ports
☆ RX features 2x USB-C (1x 5V@1A and 1x 5V@1.5A)
and 2x USB-A device ports (1x 5V@1A and 1x 5V@1.5A)
☆ Support firmware upgrade via USB-C service port
☆ Support FSYNC GPIO pass-through for industry camera use
☆ Support bi-directional 24V PoC (Power over Cable), when TX or RX gets power, the
other end does not need an external power supply
☆ Plug-and-play with no drivers, downloads, or software required
3. Package Contents
① 1× USB 3.2 Gen 1 Extender (Transmitter)
② 1× USB 3.2 Gen 1 Extender (Receiver)
③ 1× 24V/3.75A Locking Power Supply
④ 2× 4pin-3.5mm Phoenix Connector (Male)
⑤ 4× Mounting Ear
⑥ 8× Machine Screw (KM3*4)
⑦ 1× User Manual
